I made this baritone guitar out of a
damaged Rogue Series II model AB304MPL. It was a hulk when I got it and was
more damaged than was advertised. There is a crush at the bottom edge of the
top binding and a split on the side at the bottom by the end pin and a crack in
the wood there as well. The end pin was pushed in to the side veneer I believe
that I have stabilized all of these issues and that with normal use they should
not be a problem and they do not affect the playing in slightest. None of the
flaws are immediately obvious and can be seen in picture 6. It has a highly
figured top, a beautiful abalone rosette and top bindings, a nice low action
and a lot of tone and sustain. I have put in a brand new electronics package
that features a tuner. This would be a great guitar for someone who wants a
smaller body. No longer available - for Sephora.
Specifications:
Scale Length:
32 inches
Nut Width:
1 11/16 inches
Total Length:
44 inches
Body Length:
19 inches
Upper Bout Width:
11 1/4 inches
Lower Bout Width
15 inches
Body Depth:
3 ¾ inches
No comments:
Post a Comment